
| Chemical Composition of Deposited Metal (%)(CO2Shielding Gas) | |||||
| Chemical Composition | C | Mn | Si | S | P |
| Guarantee Value | ≤0.18 | ≤1.75 | ≤0.90 | ≤0.030 | ≤0.030 |
| General Result | 0.05 | 1.46 | 0.42 | 0.01 | 0.017 |
| Mechanical Properties of Deposited Metal | ||||||
| | Yield Point Rm(MPa) | Tensile Strength ReL (Mpa) | Elongation (%) | Impact Value(J) | Shield Gas | |
| 0°C | -20°C | |||||
| Standard | ≥400 | ≥480 | ≥22 | ≥47 | ≥27 | CO2 |
| Typical | 450 | 540 | 30 | 120 | 100 | |
| Reference Current (DC+) | ||||
| Wire Diameter(mm) | | φ1.2 | φ1.4 | φ1.6 |
| Current Range(A) | Down-hand Welding | 120~300 | 150~400 | 180~450 |
| Vertical Upward Welding and Overhead Position Welding | 120~260 | 150~270 | 180~280 | |
| Vertical Downward Welding and Overhead Position Welding | 200~300 | 220~300 | 250~300 | |
| Horizontal Welding | 120~280 | 150~320 | 180~350 | |
| Chemical Composition of Deposited Metal (%)(CO2Shielding Gas) | |||||
| Chemical Composition | C | Mn | Si | S | P |
| Guarantee Value | ≤0.18 | ≤1.75 | ≤0.90 | ≤0.030 | ≤0.030 |
| General Result | 0.05 | 1.46 | 0.42 | 0.01 | 0.017 |
| Mechanical Properties of Deposited Metal | ||||||
| | Yield Point Rm(MPa) | Tensile Strength ReL (Mpa) | Elongation (%) | Impact Value(J) | Shield Gas | |
| 0°C | -20°C | |||||
| Standard | ≥400 | ≥480 | ≥22 | ≥47 | ≥27 | CO2 |
| Typical | 450 | 540 | 30 | 120 | 100 | |
| Reference Current (DC+) | ||||
| Wire Diameter(mm) | | φ1.2 | φ1.4 | φ1.6 |
| Current Range(A) | Down-hand Welding | 120~300 | 150~400 | 180~450 |
| Vertical Upward Welding and Overhead Position Welding | 120~260 | 150~270 | 180~280 | |
| Vertical Downward Welding and Overhead Position Welding | 200~300 | 220~300 | 250~300 | |
| Horizontal Welding | 120~280 | 150~320 | 180~350 | |