Hot Search: Welding electrodes for carbon steel Welding electrodes for stainless steel
 |
| D172 | According with GB EDPCrMo-A3-03 | ||||||||
| Introduction: D172 is a kind of CrMo surfacing electrode with lime-titania type coating. AC/DC. It has stable arc, good slag detachability and better welding performance. | |||||||||
| Uses: Used for surfacing welding on worn-out parts of gears, dredge buckets, tractor blades, deep digging blade ploughs, mining machinery, etc. | |||||||||
| Chemical Composition of Deposited Metal (%)
| |||||||||
| Hardness of Surfacing Layer:HRC≥40 | |||||||||
| Reference Current(AC, DC)
| |||||||||
| Instructions: 1.The electrodes must be baked under about 150℃ for an hour before welding. 2.Large work pieces should be appropriately preheated to about 300℃ before surfacing welding, and the rust and the oil stains on the surfaces of the welded parts should be cleared away. | |||||||||
| D172 | According with GB EDPCrMo-A3-03 | ||||||||
| Introduction: D172 is a kind of CrMo surfacing electrode with lime-titania type coating. AC/DC. It has stable arc, good slag detachability and better welding performance. | |||||||||
| Uses: Used for surfacing welding on worn-out parts of gears, dredge buckets, tractor blades, deep digging blade ploughs, mining machinery, etc. | |||||||||
| Chemical Composition of Deposited Metal (%)
| |||||||||
| Hardness of Surfacing Layer:HRC≥40 | |||||||||
| Reference Current(AC, DC)
| |||||||||
| Instructions: 1.The electrodes must be baked under about 150℃ for an hour before welding. 2.Large work pieces should be appropriately preheated to about 300℃ before surfacing welding, and the rust and the oil stains on the surfaces of the welded parts should be cleared away. | |||||||||
