Hot Search: Welding electrodes for carbon steel Welding electrodes for stainless steel
 |
| According with GB E5014 Corresponding with AWS E7014 | ||||||||||||||||
| Introduction: E7014 is a kind of carbon steel electrode with iron powder titania type coating. The deposition efficiency is approximately 180%. AC/DC. All-position welding. It has excellent welding performance, stable arc, fewer spatters, good slag detachability and beautiful appearance of weld. | ||||||||||||||||
| Uses: Used for welding carbon steel and low-alloy structures, such as welding on ships, vehicles and machinery structures of 16Mn type. | ||||||||||||||||
| Chemical Composition of Deposited Metal (%)
| ||||||||||||||||
| Mechanical Properties of Deposited Metal
| ||||||||||||||||
| X-ray Radiographic Inspection:ⅡDegree | ||||||||||||||||
| Reference Current(AC, DC)
| ||||||||||||||||
| Instructions: 1.The stains on the weldments, such as rust, oil stains, moisture, etc., must be cleared away before welding. 2.The electrodes must be baked under 180~200℃ for an hour before welding if they have been stored for a long period of time. | ||||||||||||||||
| According with GB E5014 Corresponding with AWS E7014 | ||||||||||||||||
| Introduction: E7014 is a kind of carbon steel electrode with iron powder titania type coating. The deposition efficiency is approximately 180%. AC/DC. All-position welding. It has excellent welding performance, stable arc, fewer spatters, good slag detachability and beautiful appearance of weld. | ||||||||||||||||
| Uses: Used for welding carbon steel and low-alloy structures, such as welding on ships, vehicles and machinery structures of 16Mn type. | ||||||||||||||||
| Chemical Composition of Deposited Metal (%)
| ||||||||||||||||
| Mechanical Properties of Deposited Metal
| ||||||||||||||||
| X-ray Radiographic Inspection:ⅡDegree | ||||||||||||||||
| Reference Current(AC, DC)
| ||||||||||||||||
| Instructions: 1.The stains on the weldments, such as rust, oil stains, moisture, etc., must be cleared away before welding. 2.The electrodes must be baked under 180~200℃ for an hour before welding if they have been stored for a long period of time. | ||||||||||||||||
