Hot Search: Welding electrodes for carbon steel Welding electrodes for stainless steel
 |
| According with GB E4024 Corresponding with AWS E7024 | ||||||||||||||||
| Introduction: E7024 is a kind of high efficiency carbon steel electrode with iron powder titania type coating. The deposition efficiency is approximately 180%. AC/DC. Suitable for fillet welding in the downhand position, downhand welding and flat fillet welding. It has excellent welding performance, stable arc, easy operation, fewer spatters, good slag detachability, deeper penetration, no undercut and beautiful appearance of weld. | ||||||||||||||||
| Uses: Used for welding carbon steel and low-alloy structures, such as A, B and D steel, ships, locomotive vehicles, boilers of 16Mn type, etc. | ||||||||||||||||
| Chemical Composition of Deposited Metal (%)
| ||||||||||||||||
| Mechanical Properties of Deposited Metal
| ||||||||||||||||
| X-ray Radiographic Inspection:ⅡDegree | ||||||||||||||||
| Reference Current(AC, DC)
| ||||||||||||||||
| Instructions: 1.The stains on the weldments, such as rust, oil stains, moisture, etc., must be cleared away before welding. 2.The electrodes must be baked under 180~200℃ for an hour before welding if they have been stored for a long period of time | ||||||||||||||||
| According with GB E4024 Corresponding with AWS E7024 | ||||||||||||||||
| Introduction: E7024 is a kind of high efficiency carbon steel electrode with iron powder titania type coating. The deposition efficiency is approximately 180%. AC/DC. Suitable for fillet welding in the downhand position, downhand welding and flat fillet welding. It has excellent welding performance, stable arc, easy operation, fewer spatters, good slag detachability, deeper penetration, no undercut and beautiful appearance of weld. | ||||||||||||||||
| Uses: Used for welding carbon steel and low-alloy structures, such as A, B and D steel, ships, locomotive vehicles, boilers of 16Mn type, etc. | ||||||||||||||||
| Chemical Composition of Deposited Metal (%)
| ||||||||||||||||
| Mechanical Properties of Deposited Metal
| ||||||||||||||||
| X-ray Radiographic Inspection:ⅡDegree | ||||||||||||||||
| Reference Current(AC, DC)
| ||||||||||||||||
| Instructions: 1.The stains on the weldments, such as rust, oil stains, moisture, etc., must be cleared away before welding. 2.The electrodes must be baked under 180~200℃ for an hour before welding if they have been stored for a long period of time | ||||||||||||||||
