Hot Search: Welding electrodes for carbon steel Welding electrodes for stainless steel
 |
| A207 | According with GB E316-15 Corresponding with AWS E316-15 | ||||||||||||||||||||
| Introduction: A207 is a kind of low-carbon Cr18Ni12Mo2 stainless steel electrode with basic coating. Due to Mo added to the weld metal, it has excellent corrosion-resistance, heat-resistance and crack-resistance, especially suitable for chloride ion pitting corrosion-resistance. DCRP (Direct Current Reversed Polarity). All-position welding. | |||||||||||||||||||||
| Uses: Used for welding low-carbon 0Cr18Ni12Mo2 stainless steel equipment, and also used for welding high-chrome steel (such as Cr13 and Cr17), which can not be given heat treatment after welding, and welding dissimilar steel. | |||||||||||||||||||||
| Chemical Composition of Deposited Metal (%)
| |||||||||||||||||||||
| Mechanical Properties of Deposited Metal
| |||||||||||||||||||||
| Reference Current(DC+)
| |||||||||||||||||||||
| Instructions: 1.The electrodes should be baked under about 250℃ for an hour before welding. 2.The stains on the weldments, such as rust, oil stains, moisture, etc., must be cleared away before welding. | |||||||||||||||||||||
| A207 | According with GB E316-15 Corresponding with AWS E316-15 | ||||||||||||||||||||
| Introduction: A207 is a kind of low-carbon Cr18Ni12Mo2 stainless steel electrode with basic coating. Due to Mo added to the weld metal, it has excellent corrosion-resistance, heat-resistance and crack-resistance, especially suitable for chloride ion pitting corrosion-resistance. DCRP (Direct Current Reversed Polarity). All-position welding. | |||||||||||||||||||||
| Uses: Used for welding low-carbon 0Cr18Ni12Mo2 stainless steel equipment, and also used for welding high-chrome steel (such as Cr13 and Cr17), which can not be given heat treatment after welding, and welding dissimilar steel. | |||||||||||||||||||||
| Chemical Composition of Deposited Metal (%)
| |||||||||||||||||||||
| Mechanical Properties of Deposited Metal
| |||||||||||||||||||||
| Reference Current(DC+)
| |||||||||||||||||||||
| Instructions: 1.The electrodes should be baked under about 250℃ for an hour before welding. 2.The stains on the weldments, such as rust, oil stains, moisture, etc., must be cleared away before welding. | |||||||||||||||||||||
