Hot Search: Welding electrodes for carbon steel Welding electrodes for stainless steel
 |
| A022Mo | According with GB E317L-16 Corresponding with AWS E317L-16 | ||||||||||||||||||||
| Introduction: A022Mo is a kind of ultra-low-carbon Cr18Ni12Mo3 stainless steel electrode with lime-titania type coating. The carbon content of the deposited metal is lower than or equal to 0.04%. It has excellent heat-resistance, corrosion-resistance, crack-resistance and blowhole-resistance. Its corrosion-resistance is especially more excellent than that of A022. It has excellent welding performance. The coating has red-resistance and high strength. AC/DC. | |||||||||||||||||||||
| Uses: Used for welding ultra-low-carbon 00Cr18Ni12Mo3 stainless steel, and also used for welding Cr stainless steel which does not need heat treatment after welding, composite steel and dissimilar steel. | |||||||||||||||||||||
| Chemical Composition of Deposited Metal (%)
| |||||||||||||||||||||
Mechanical Properties of Deposited Metal
| |||||||||||||||||||||
Reference Current(AC, DC+)
| |||||||||||||||||||||
| Instructions: 1.The electrodes should be baked under 200-250℃ for an hour before welding. 2.Direct current had better be used and the current should not be too strong. | |||||||||||||||||||||
| A022Mo | According with GB E317L-16 Corresponding with AWS E317L-16 | ||||||||||||||||||||
| Introduction: A022Mo is a kind of ultra-low-carbon Cr18Ni12Mo3 stainless steel electrode with lime-titania type coating. The carbon content of the deposited metal is lower than or equal to 0.04%. It has excellent heat-resistance, corrosion-resistance, crack-resistance and blowhole-resistance. Its corrosion-resistance is especially more excellent than that of A022. It has excellent welding performance. The coating has red-resistance and high strength. AC/DC. | |||||||||||||||||||||
| Uses: Used for welding ultra-low-carbon 00Cr18Ni12Mo3 stainless steel, and also used for welding Cr stainless steel which does not need heat treatment after welding, composite steel and dissimilar steel. | |||||||||||||||||||||
| Chemical Composition of Deposited Metal (%)
| |||||||||||||||||||||
Mechanical Properties of Deposited Metal
| |||||||||||||||||||||
Reference Current(AC, DC+)
| |||||||||||||||||||||
| Instructions: 1.The electrodes should be baked under 200-250℃ for an hour before welding. 2.Direct current had better be used and the current should not be too strong. | |||||||||||||||||||||
