Hot Search: Welding electrodes for carbon steel Welding electrodes for stainless steel
 |
| According with GB E309L-16 Corresponding with AWS E309L-16 | ||||||||||||||||||
| Introduction: It is a kind of ultra-low-carbon Cr23Ni13 stainless steel electrode with lime-titania type coating. AC/DC. Due to the low carbon content, it can still resist inter-crystalline corrosion led to by carbide precipitation without any stabilizers like Nb, Ti, etc. | ||||||||||||||||||
| Uses: Used for stainless steel structures of the same types, composite steel, dissimilar steel, etc. in the production of equipment of synthetic fiber, petrochemical industry, etc., and also used for surfacing welding on nuclear reactors and transition layers of pressure vessel inner surfaces and welding inner parts of synthesis towers. | ||||||||||||||||||
| Chemical Composition of Deposited Metal (%)
| ||||||||||||||||||
| Mechanical Properties of Deposited Metal
| ||||||||||||||||||
| Reference Current(AC, DC+)
| ||||||||||||||||||
| Instructions: 1.The electrodes should be baked under 200-250℃ for an hour before welding. 2.Direct current had better be used and the current should not be too strong. |
| According with GB E309L-16 Corresponding with AWS E309L-16 | ||||||||||||||||||
| Introduction: It is a kind of ultra-low-carbon Cr23Ni13 stainless steel electrode with lime-titania type coating. AC/DC. Due to the low carbon content, it can still resist inter-crystalline corrosion led to by carbide precipitation without any stabilizers like Nb, Ti, etc. | ||||||||||||||||||
| Uses: Used for stainless steel structures of the same types, composite steel, dissimilar steel, etc. in the production of equipment of synthetic fiber, petrochemical industry, etc., and also used for surfacing welding on nuclear reactors and transition layers of pressure vessel inner surfaces and welding inner parts of synthesis towers. | ||||||||||||||||||
| Chemical Composition of Deposited Metal (%)
| ||||||||||||||||||
| Mechanical Properties of Deposited Metal
| ||||||||||||||||||
| Reference Current(AC, DC+)
| ||||||||||||||||||
| Instructions: 1.The electrodes should be baked under 200-250℃ for an hour before welding. 2.Direct current had better be used and the current should not be too strong. |
